Saltar navegación principal
Normas ASTM – AENOR
ASTM A678/A678M-05(2009)

ASTM A678/A678M-05(2009)

Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates (Withdrawn 2010)

Fecha:
2010-09-01 /Withdrawn
No replacement
Abstract:

This specification covers quenched-and-tempered carbon steel and high-strength low-alloy steel plates of structural quality for welded, riveted, or bolted construction. The plates shall undergo heat treatment by heating to a temperature that produces an austenitic structure. Heat and product analyses shall be performed on the material and shall conform to the required amount of chemical composition in carbon, manganese, phosphorus, sulfur, silicon, vanadium, columbium, nitrogen, and copper. The plates shall withstand tension test and applicable grade shall conform to the specified mechanical properties such as yield strength, tensile strength, and elongation.

Scope:

1.1 This specification covers quenched-and-tempered carbon steel and high-strength low-alloy steel plates of structural quality for welded, riveted, or bolted construction.

1.2 If the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be used.

1.3 Plates under this specification are available in four grades as follows:



GradeYield
Strength,
min, ksi
[MPa]
Tensile Strength,
ksi [MPa]
Maximum
Thickness,
in. [mm]
A 50 [345] 7090 [485620] 11/2 [40]
B 60 [415] 80100 [550690] 21/2 [65]
C A A 2 [50]
D 75 [515] 90110 [620760] 3 [75]

A Varies with thickness. See Table 1.


1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system is to be used independently of the other.

Keywords:
bolted construction; carbon; high-strength; low-alloy; plates; quenched; steel; structural steel; tempered; welded construction; Bolted construction materials/applications--specifications; Carbon steel plate--specifications; Fine-grain steel; HSLA (high-strength low-alloy) steel plate--specifications; Killed steel; Quenched and tempered steels (specifications); Riveted construction--specifications; Structural steel (SS) plate--specifications; Welded steel plate/sheet/strip--specifications
44,62
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta