Saltar navegación principal
Normas ASTM – AENOR
ASTM D5336-09

ASTM D5336-09

Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

Fecha:
2015-04-08 /Historical
Superseeded by:
Abstract:

This specification covers the classification, testing, and requirements of polyphthalamide (PPA) materials, both virgin and recycled, suitable for injection molding. This specification is intended to be a means of calling out plastics materials used in the fabrication of end items or parts, and not for the selection of materials. The materials are classified into groups according to crystallinity, and are further subdivided into classes and grades as specified. Materials shall be sampled, prepared, and conditioned appropriately for testing, for which specimens shall conform to specified values of the following requirements: inherent viscosity; melting temperature; glass transition; tensile strength; flexural strength and modulus; Izod impact strength; deflection temperature; and moisture.

Scope:

1.1 This specification covers polyphthalamide materials suitable for injection molding.

1.2 The properties included in this specification are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5. See Guide D 5740.

1.3 This specification allows for the use of recycled materials provided that all specification requirements are met.

1.4 This specification is intended to be a means of calling out plastics materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastics field only after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this specification.

1.5 The values stated in SI units are to be regarded as the standard (see IEEE/ASTM SI-10). The values given in parentheses are for information only.

1.6 The following precautionary caveat pertains only to the test methods portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 6.

Note 1—There is no known ISO equivalent to this specification.

Keywords:
inherent viscosity; line call-out; moisture analysis; molding material; plastic; polyphthalamide; Inherent viscosity; Line call-out specifications--plastics; Moisture analysis--plastics; Molding/extrusion compounds/materials--specifications; Polyphthalamide (PPA); Viscosity--plastics
50,71
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta