Saltar navegación principal
Normas ASTM – AENOR
ASTM D4707-09

ASTM D4707-09

Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

Fecha:
2013-07-17 /Historical
Superseeded by:
Significance and Use:

Paint spatter generated by roller application is dependent on the properties of both the paint being applied and the paint roller cover used for the application. To eliminate the influence of the paint roller cover as a variable, and thus restrict the spatter-inducing variable to the paint under test only, the paint roller cover is replaced by a standard notched spool roller to generate spatter by a mechanism that simulates that of a paint-applying roller cover.

Although most of the development work to establish this test method was undertaken using latex paints, sufficient work was also done to show its applicability to solvent-reducible paints.

Tests during the development of this test method showed that the spattering properties of paints, like other physical properties, may in time change. Therefore, the results of this test are valid only for the time when the test is run.

Scope:

1.1 This test method covers the determination of the tendency of a paint to spatter when applied with a paint roller to a substrate.

1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
paint spatter resistance; resistance<span class='unicode'>&#x2014;</span>paint spatter; roller application; spattering; Substrates--coating applications; Draw-down test; Latex paints; Paint spatter resistance; Plastic sheet and film; Roller application of paints; Solventborne paints/coatings; Spattering; Waterborne coatings
51,39
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta