Saltar navegación principal
Normas ASTM – AENOR
ASTM D3835-08

ASTM D3835-08

Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

Fecha:
2016-05-20 /Historical
Superseeded by:
Significance and Use:

This test method is sensitive to polymer molecular weight and molecular weight distribution, polymer stabilityboth thermal and rheological, shear instability, and additives such as plasticizers, lubricants, moisture reinforcements, or inert fillers, or combination thereof.

The sensitivity of this test method makes the data useful for correlating with processing conditions and aids in predicting necessary changes in processing conditions. Unlike Test Method D 1238, which makes a one-point measure at a shear rate typically below processing conditions, this test method determines the shear sensitivity and flow characteristics at processing shear rates, and therefore can be used to compare materials of different compositions.

Scope:

1.1 This test method covers measurement of the rheological properties of polymeric materials at various temperatures and shear rates common to processing equipment. It covers measurement of melt viscosity, sensitivity, or stability of melt viscosity with respect to temperature and polymer dwell time in the rheometer, die swell ratio (polymer memory), and shear sensitivity when extruding under constant rate or stress. The techniques described permit the characterization of materials that exhibit both stable and unstable melt viscosity properties.

1.2 This test method has been found useful for quality control tests on both reinforced and unreinforced thermoplastics, cure cycles of thermosetting materials, and other polymeric materials having a wide range of melt viscosities.

1.3 The values stated in SI units are to be regarded as standard. The inch-pound units given in parentheses are for information only.

Note 1—Although this test method and ISO 114431995, PlasticDetermination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers differ in approach or detail, the data obtained using ISO 11443, Method A is technically equivalent to this test method

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
capillary; plastics; polymers; rheology; thermal flow; viscosity; Capillary rheometer method; Flow and flow rate--thermoplastics; Melt viscosity; Polymers; Rheology/rheological properties--plastics; Shear testing--plastics; Stress--plastics; Thermoplastics; Viscosity--plastics
57,26
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta