Saltar navegación principal
Normas ASTM – AENOR
ASTM A494/A494M-08

ASTM A494/A494M-08

Standard Specification for Castings, Nickel and Nickel Alloy

Fecha:
2010-12-31 /Historical
Superseeded by:
Abstract:

This specification covers nickel, nickel-copper, nickel-copper-silicon, nickel-molybdenum, nickel-chromium, and nickel-molybdenum-chromium alloy castings for corrosion resistant service. The castings shall be heat treated. When Class 1 is specified, grades CY40 and M25S shall be supplied in the as-cast condition. When Class 2 is specified, grades CY40 and M25S shall be supplied in the solution treated condition. When Class 3 is specified, grade M25S shall be supplied in the age-hardened condition. The chemical composition requirements of the alloys are presented. The tensile property requirements including the heat treatment procedure for the castings are presented in detail. It is required that one tension test shall be made from each master heat except for grades M25S and CY5SnBiM when the master heat is used to pour the castings. One tension test shall be made from each melt except for grades M25S and CY5SnBiM. Test results shall conform to the specified tensile requirements.

Scope:

1.1 This specification covers nickel, nickel-copper, nickel-copper-silicon, nickel-molybdenum, nickel-chromium, and nickel-molybdenum-chromium alloy castings for corrosion-resistant service.

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

Keywords:
corrosion-resistant applications; nickel; nickel alloy castings; nickel alloys; nickel castings; Corrosive service applications--castings; Nickel--specifications; Nickel alloy castings--specifications; Nickel-chromium-iron alloys--specifications; Nickel-copper alloy steel--specifications; Nickel-copper-silicon; Nickel-molybdenum alloys--specifications; Nickel-molybdenum-chromium alloys--specifications
51,73
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta