Saltar navegación principal
Normas ASTM – AENOR
ASTM A204/A204M-03(2007)

ASTM A204/A204M-03(2007)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

Fecha:
2012-07-02 /Historical
Superseeded by:
Abstract:

This specification covers molybdenum alloy steel plates, intended particularly for welded boilers and other pressure vessels. Plates under this specification are available in three grades having different strength levels: Grade A; Grade B; and Grade C. The steel shall be killed. The steel shall conform to the chemical requirements specified. Tension tests on plates shall conform to the requirements specified.

Scope:

1.1 This specification covers molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels.

1.2 Plates under this specification are available in three grades having different strength levels as follows:

Grade Tensile Strength, ksi [MPa]
A 6585 [450585]
B 7090 [485620]
C 7595 [515655]

1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness of plates furnished under this specification as follows:

Grade Maximum Thickness, in. [mm]
A 6 [150]
B 6 [150]
C 4 [100]

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

Keywords:
Alloy steel plate--specifications; Molybdenum alloys--specifications; Pressure vessel steel plate--specifications
45,42
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta