Saltar navegación principal
Normas ASTM – AENOR
ASTM A203/A203M-97(2007)

ASTM A203/A203M-97(2007)

Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

Fecha:
2010-12-31 /Historical
Superseeded by:
Scope:

1.1 This specification covers nickel-alloy steel plates intended primarily for welded pressure vessels.

1.2 Plates under this specification are available with four strength levels and two nickel compositions as follows:

GradeNominal Nickel
Content %
Yield Strength, min, ksi [MPa]Tensile Strength, min, ksi [MPa]
A2.2537 [255]65 [450]
B2.2540 [275]70 [485]
D3.5037 [255]65 [450]
E3.5040 [275]70 [485]
F3.50
2 in. [50 mm] and under 55 [380] 80 [550] cccc
Over 2 in. [50 mm] 50 [345] 75 [515]

1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. However, current practice normally limits the maximum thickness of plates furnished under this specification as follows:

Grade Maximum Thickness, in. [mm]
A6 [150]
B6 [150]
D4 [100]
E4 [100]
F4 [100]

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents. Therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

Keywords:
alloy steel plate; nickel alloy steel; pressure containing parts; pressure vessel steels; steel plates; steel plates for pressure vessel applications; Nickel alloy steel plate (for welded pressure vessels); Alloy steel plate--specifications
45,48
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta