Saltar navegación principal
Normas ASTM – AENOR
ASTM D1349-07

ASTM D1349-07

Standard Practice for Rubber-Standard Temperatures for Testing

Fecha:
2010-12-31 /Historical
Superseeded by:
Abstract:

This practice covers a list of standard temperatures from which selection may be made for any specific test or test method. Tolerances of the test temperature shall be in accordance with the specific requirement. This tolerance is the maximum allowable variation in the temperature of the space enclosing the specimens being tested. The average temperature of the space shall be as close as practicable to the specified temperature.

Scope:

1.1 This practice covers a list of standard temperatures from which selection may be made for any specific test or test method. Any standard or specification that specifies test temperatures not listed shall take precedence over this practice.

1.2 These temperatures do not apply to mixing, processing, or vulcanizing temperatures for rubber compounds. Any standard requiring preparation of a particular rubber compound should specify the conditions to be used.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
standard test temperatures
44,47
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta