Saltar navegación principal
Normas ASTM – AENOR
ASTM B80-07

ASTM B80-07

Standard Specification for Magnesium-Alloy Sand Castings

Fecha:
2017-08-16 /Historical
Superseeded by:
Abstract:

This specification covers magnesium-alloy sand castings. The castings shall conform to the chemical composition limits specified. The castings may be subjected to such heat treatment as deemed necessary to produce material that will conform to the requirements specified. Heat treatment shall be performed on the whole casting and never on a portion. Foundry control shall consist of examination of the castings by radiographic or other approved methods for determining internal discontinuities until the gating, pouring, and other foundry practices have been established to produce castings meeting the quality standards. The tension test specimens representing the castings shall conform to the requirements.

Scope:

1.1 This specification covers magnesium-alloy sand castings designated as shown in .

1.2 The values stated in inch-pound units are to be regarded as the standard. The SI values in parentheses are provided for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
magnesium alloy; sand castings
56,93
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta