Saltar navegación principal
Normas ASTM – AENOR
ASTM D832-07

ASTM D832-07

Standard Practice for Rubber Conditioning For Low Temperature Testing

Fecha:
2013-02-11 /Historical
Superseeded by:
Significance and Use:

Low temperature testing of rubber can yield repeatable results only if the preconditioning of the samples is consistent. Properties such as brittleness and modulus are greatly affected by variations in time/temperature exposures. This practice is intended to provide uniform conditioning for the various low temperature tests conducted on rubbers.

Scope:

1.1 This practice covers the characteristic mechanical behavior of rubbers at low temperatures, and outlines the conditioning procedure necessary for testing at these temperatures.

1.2 One of the first stages in establishing a satisfactory technique for low temperature testing is the specification of the time and temperature of exposure of the test specimen. It has been demonstrated that any one or more of the following distinct changes, which are detailed in Table 1, may take place on lowering the test temperature:

1.2.1 Simple temperature effects,

1.2.2 Glass transitions, and

1.2.3 First order transitions (crystallization), and solubility and other effects associated with plasticizers.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
brittleness; brittle point; crystallization; enthalpy; first order transition; glass transition; low temperature test; modulus; plasticizer effects; resilience; second order transition; simple temperature effects; solubility; stiffening; subnormal temperature; thermodynamic change; viscoelasticity
45,51
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta