Saltar navegación principal
Normas ASTM – AENOR
ASTM B140/B140M-07

ASTM B140/B140M-07

Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

Fecha:
2012-11-19 /Historical
Superseeded by:
Abstract:

This specification establishes the requirements for copper-zinc-lead (leaded red brass or hardware bronze) rods, bars, and shapes of UNS Alloy Nos. C31400, C31600, and C32000 used for screw machine applications. Tempers available to this specification are O60 (soft anneal), H02 (half-hard), and H04 (hard). Materials for manufacture shall be cast billets, logs, or rods of such purity and soundness as to be suitable for processing by hot working, cold-working, straightening, and annealing to produce a uniform wrought structure in the finished product. Tempers available under this specification are O60 (soft anneal), H02 (half-hard), and H04 (hard). Products shall be tested and conform to dimensional (mass, diameter, length, straightness, and shape), mechanical (tensile and yield strength, and elongation), and chemical composition requirements.

Scope:

1.1 This specification establishes the requirements for copper-zinc-lead (leaded red brass or hardware bronze) rod, bar, and shapes of UNS Alloy Nos. C31400, C31600, and C32000 available for screw machine applications.

1.2 Units—The values stated in inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Keywords:
C31400; C31600; C32000; hardware bronze; hardware bronze rod; hardware bronze shapes; leaded brass shapes; leaded red brass bar; leaded red brass rod
46,16
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta