Saltar navegación principal
Normas ASTM – AENOR
ASTM D2947-88(2006)

ASTM D2947-88(2006)

Standard Test Method for Screen Analysis of Asbestos Fibers

Fecha:
2012-02-09 /Historical
Superseeded by:
Significance and Use:

Test results give some indication of the apparent fiber length distribution in the sample tested.

Sieves are ideally suited to measure particle size and particle size distribution when all three axes of the particle are equidimensional or the particle is of spherical shape. Asbestos fibers differ considerably from these ideal conditions and, therefore, results depart from a true measure of fiber length and length distribution.

Characteristics that influence screening efficiency influence test results. Among these are moisture content, degree of fiberization, harshness, and the tendency for fibers to cling together, and of short fibers and fines to cling to longer fibers.

In spite of its shortcomings, this test method is particularly useful because of its simplicity and speed and satisfactory reproducibility.

The test is suitable for specification acceptance and manufacturing control.

Scope:

1.1 This test method covers a dry screen analysis for asbestos fiber by means of a mechanical sieve shaker.

1.2 This test method is limited in its application to Group 4 and shorter chrysotile asbestos fiber samples as defined in Test Method D 3639. However, some short amphibole asbestos fibers may be suitable for evaluation by this method.

1.3 The values stated in SI units are standard. The inch-pound (customary) units in brackets are presented for information only.

1.4 Warning-Breathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to "Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures."

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety hazard, see 1.4.

Keywords:
asbestos; fiber; fiber length distribution; Ro-Tap screen; screen analysis; sieving
51,1
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta