Saltar navegación principal
ASTM D2148-02e1

ASTM D2148-02e1

Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

2010-12-31 /Historical
Superseeded by:
Significance and Use:

Self-adhesion is a primary initial property since it affects layer-to-layer bonding. The integrity of the bond can significantly affect the electrical and physical performance of the insulation system. Therefore, the degree of self-adhesion is directly related to apparatus performance.

A high degree of self-adhesion is desirable for most electrical applications. In this test, a short unwinding length indicates a high degree of self-adhesion.

This test method has been found useful as a quality control test for lot acceptance.


1.1 These test methods cover tests for bondable silicone rubber tapes which form a sealed structure either with the application of heat (and pressure if needed) or by the process of auto-adhesion (self-fusing).

1.2 The methods appear in the following sections:

Test MethodSection
Bond Strength10-17
Dielectric Breakdown Voltage18-25
Length 32 and 33
Width 35-39

1.3 The values stated in inch-pound units are to be regarded as the standard except for °C.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement see 22.1.1.

bond strength; bondable silicone rubber tape; dielectric breakdown voltage; durometer hardness; electrical insulation; self-fusing tape; taper edge tape
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta