Saltar navegación principal
Normas ASTM – AENOR
ASTM D740-05

ASTM D740-05

Standard Specification for Methyl Ethyl Ketone

Fecha:
2011-12-13 /Historical
Superseeded by:
Abstract:

This specification covers two types of methyl ethyl ketone (or 2-butanone), namely: Type I (regular grade) and Type II (urethane grade), that are used primarily as solvents in lacquers and industrial coatings, but also in adhesives, printing inks, lube oil dewaxing, and as chemical intermediates. The physical and chemical properties of methyl ethyl ketone shall conform to the requirements specified for the following: (1) acidity, (2) weight percentage of alcohol, (3) color (Pt-Co scale), (4) distillation range defined by the initial boiling point and dry point, (5) nonvolatile matter content, (6) purity, (7) apparent specific gravity, and (8) weight percentage of water. The sampling and test methods for determining conformance to the specified physical and chemical properties are given.

Scope:

1.1 This specification covers two types of methyl ethyl ketone that are used primarily as solvents in lacquers and industrial coatings, but also in adhesives, printing inks, lube oil dewaxing, and as chemical intermediates.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 The following applies to all specified limits in this standard; for purposes of determining conformance with this standard, an observed value or a calculated value shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.

1.4 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification.

Keywords:
methyl ethyl ketone; regular grade; solvents; urethane grade; 2-butanone
44,9
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta