Saltar navegación principal
Normas ASTM – AENOR
ASTM A1030/A1030M-05

ASTM A1030/A1030M-05

Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

Fecha:
2011-05-06 /Historical
Superseeded by:
Significance and Use:

The definitions and procedures for measuring flatness characteristics of steel sheet products are provided so that purchasers and suppliers have common definitions and measuring procedures for flatness characteristics. The intention of these definitions and measuring methods is not to provide a dimensional specification for flatness characteristics, but rather common procedure(s) for quantifying flatness anomalies. For determining compliance with flatness specifications, references are provided to appropriate ASTM standards.

Scope:

1.1 Flatness is a significant quality characteristic of steel sheet products. Sheet flatness is affected by mill process factors plus the grade, thickness and width of the material supplied. It is the purpose of this practice to define the different flatness characteristics and to describe the method(s) most commonly used to measure particular characteristics. The methods described are designed and intended to be used in mill situations and environments.

1.2 The substrate shall conform to all the requirements of the appropriate specifications as follows: Specifications A 568/A 568M or A 924/A 924M.

1.3 Quantitative limits are not addressed and are established in the general requirements, or individual product specifications, or both; or when applicable, as agreed to between supplier and user.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
flatness; steel sheet; steel sheet-metallic-coated
56,81
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta