Saltar navegación principal
Normas ASTM – AENOR
ASTM D4947-05

ASTM D4947-05

Standard Test Method for Chlordane and Heptachlor Residues in Indoor Air (Withdrawn 2011)

Fecha:
2011-09-01 /Withdrawn
No replacement
Significance and Use:

This test method is intended to be used primarily for non-occupational exposure monitoring in domiciles, public access buildings and offices.

Chlordane has been used widely as a general insecticide for crops (for example, cotton) and as a termiticide. Heptachlor is a major component of technical chlordane and an insecticide in its own right. Although their use in the United States was discontinued in 1988, residues of the chemicals may remain in indoor air for many years after application.

Scope:

1.1 This test method covers the sampling and analysis of indoor atmospheres for residues of chlordane and heptachlor.

1.2 This test method is based upon the collection of chlordane and heptachlor from air onto polyurethane foam (PUF) and analysis by gas chromatography coupled with electron capture detection.

1.3 This test method is applicable to concentrations of chlordane varying from 0.1 to 100 g/m3 and heptachlor varying from 0.01 to 80.0 g/m3 with sampling periods to collect at least 0.25 m3 of air. Detection limits will depend upon the conditions of the gas chromatography (GC) and the length of the sampling period.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
chlordane; electron capture detection; gas chromatography; heptachlor; indoor air; polyurethane foam
51,8
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta