Saltar navegación principal
Normas ASTM – AENOR
ASTM A747/A747M-04

ASTM A747/A747M-04

Standard Specification for Steel Castings, Stainless, Precipitation Hardening

Fecha:
2017-08-16 /Historical
Superseeded by:
Scope:

1.1 This specification covers iron-chromium-nickel-copper corrosion-resistant steel castings, capable of being strengthened by precipitation hardening heat treatment.

1.2 These castings may be used in services requiring corrosion resistance and high strengths at temperatures up to 600°F [315°C]. They may be machined in the solution-annealed condition and subsequently precipitation hardened to the desired high-strength mechanical properties specified in with little danger of cracking or distortion.

1.3 The material is not intended for use in the solution-annealed condition.

Note 1—If the service environment in which the material is to be used is considered conducive to stress-corrosion cracking, precipitation hardening should be performed at a temperature that will minimize the susceptibility of the material to this type of attack.

1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

Keywords:
precipitation hardening stainless steel; stainless steel; steel castings
44,9
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta