Saltar navegación principal
ASTM E2304-03

ASTM E2304-03

Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System

2011-11-22 /Historical
Superseeded by:

1.1 This practice covers the handling, testing, and procedure for using a lithium fluoride (LiF)-based photo-fluorescent film dosimetry system to measure absorbed dose (relative to water) in materials irradiated by photons or electrons. Other alkali halides that may also exhibit photofluorescence (for example, NaCl, NaF, and KCl) are not covered in this practice. Although various alkali halides have been used for dosimetry for years utilizing thermoluminescence, the use of photoluminescence is relatively new.

1.2 This practice applies to photo-fluorescent film dosimeters (referred hereafter as photo-fluorescent dosimeters) that can be used within part or all of the following ranges:

1.2.1 Absorbed dose range of 5 10-2 to 3 102 kGy (1-3).

1.2.2 Absorbed dose rate range of 0.3 to 2 10 4 Gy/s (2-5)).

1.2.3 Radiation energy range for photons of 0.05 to 10 MeV (2).

1.2.4 Radiation energy range for electrons of 0.1 to 10 MeV (2).

1.2.5 Radiation temperature range of -20 to +60°C (6,7).

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

absorbed dose; calibration facility; dosimeter; dosimeter calibration; dosimetry system; electron beam; food irradiation; gamma ray; ionizing radiation; photo-fluorescent dosimeter; quality assurance; radiation processing; routine dosimeter
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta