Saltar navegación principal
ASTM D6894-03

ASTM D6894-03

Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

2010-12-31 /Historical
Superseeded by:

1.1 This test method was designed to evaluate an engine oil's resistance to aeration in automotive diesel engine service. It is commonly referred to as the Engine Oil Aeration Test (EOAT). The test is conducted using a specified 7.3L, direct-injection, turbocharged diesel engine on a dynamometer test stand. This test method was developed as a replacement for Test Method D 892 after it was determined that this bench test did not correlate with oil aeration in actual service. The EOAT was first included in API Service Category CG-4 in 1995.

Note 1—Companion test methods used to evaluate engine oil performance for specification requirements are discussed in the latest revision of Specification D 4485.

1.2 The unit values stated in this test method shall be regarded as the standard. The values given in parentheses are provided for information only. SI units are considered the primary units for this test method. The only exception is where there is no direct SI equivalent, for example, screw threads, national pipe threads/diameters, and tubing size.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4 This test method is arranged as follows:

Referenced Documents2
Summary of Test Method4
Significance and Use5
Reagents and Materials7
Preparation of Apparatus8
Test Procedure10
Determination of Test Results11
Precision and Bias13
Engine System DrawingsAnnex A1
aeration; automotive; diesel engine; EOAT; foaming; heavy-duty; HEUI; medium-duty
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta