Saltar navegación principal
Normas ASTM – AENOR
ASTM C158-95

ASTM C158-95

Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

Fecha:
2017-08-16 /Historical
Superseeded by:
Scope:

1.1 These test methods cover the determination of the modulus of rupture in bending of glass and glass-ceramics.

1.2 These test methods are applicable to annealed and prestressed glasses and glass-ceramics available in varied forms. Alternative test methods are described; the test method used shall be determined by the purpose of the test and geometric characteristics of specimens representative of the material.

1.2.1 Test Method A is a test for modulus of rupture of flat glass.

1.2.2 Test Method B is a comparative test for modulus of rupture of glass and glass-ceramics.

1.3 The test methods appear in the following order:

Sections
Test Method A6 to 9
Test Method B10 to 15

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 10 and A1.5, A2.3.3, A2.4.3 and A2.5.3.

Keywords:
glass; glass-ceramics; modulus of rupture (MOR); residual stress; stress cracking tests; flexural (modulus of rupture) testing of glass/glass-ceramics
50,72
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta