Saltar navegación principal
Normas ASTM – AENOR
ASTM A914/A914M-92

ASTM A914/A914M-92

Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

Fecha:
2017-08-16 /Historical
Superseeded by:
Scope:

1.1 This specification covers hot-worked alloy and carbon-boron steels designed to attain restricted depth of hardening in the end-quench test. These steel compositions are identified by the suffix letter "RH" added to the conventional grade number.

1.2 In general, steels with restricted hardenability (RH steels) will exhibit a hardness range not greater than 5 HRC at the initial position on the end-quench hardenability bar and not greater than 65% of the hardness range for standard H-band steels (Specification A304) in the inflection region. Generally the restricted hardenability band follows the middle of the corresponding standard H-band. An example of the RH band compared with the H band is given for Grade 4140 in Fig. 1.

1.3 This specification is expressed in both inch-pound units and SI units. However, the material will be supplied to inch-pound units unless the purchase order specifies the "M" specification designation.

Keywords:
Carbon-boron steel; End-quench hardenability; Hardenability-steel; Steel bars-alloy steel; Steel bars-carbon steel; steel bars-alloy (hot-worked)/carbon-boron, subject to restricted; end-quench hardenability requirements, spec
73,15
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta