Saltar navegación principal
ASTM E1932-97(2002)e1

ASTM E1932-97(2002)e1

Standard Guide for Acoustic Emission Examination of Small Parts

2017-08-16 /Historical
Superseeded by:

1.1 This guide covers techniques for conducting acoustic emission (AE) examinations of small parts. It is confined to test objects (or defined regions of larger objects) where there is low AE signal attenuation throughout the test region. This eliminates the consideration of complex attenuation factor corrections and multiple sensor and array placements based on overcoming signal losses over distances.

1.2 The guide assumes a typical AE examination as one where there is a controlled or measured stress acting upon the part being monitored by AE. Particular emphasis is placed on sensor and system selection, sensor placements, stressing considerations, noise reduction/rejection techniques, spatial filtering, location determination, use of guard sensors, collection of AE data, AE data analysis and report. The purpose of the AE examination is to analyze how an object under evaluation is withstanding the applied load.

1.3 Possible applications of this guide includes materials characterization, quality control of production processes, proof testing after fabrication, evaluating regions of interest of larger structures and retesting after intervals of service. The applied load may include mechanical forces (tension, compression or torsional) internal pressure and thermal gradients.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

acoustic emission; mateirals characterization; nondestructive evaluation; nondestructive testing; production quality control; small parts
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta