Saltar navegación principal
ASTM E1276-96e1

ASTM E1276-96e1

Standard Practice for Use of a Polymethylmethacrylate Dosimetry System (Withdrawn 2002)

2017-08-17 /Replaced
Replaced by

1.1 This practice covers procedures for using hermetically-sealed polymethylmethacrylate (PMMA) dosimeters for measuring absorbed dose in materials irradiated by photons or electrons in terms of absorbed dose in water.

1.2 This practice covers systems that permit absorbed dose measurements under the following conditions:

1.2.1 The absorbed dose range is 0.1 to 50 kGy.

1.2.2 The absorbed dose rate is 1 X 10-2 to 1 X 107 Gy[dot]s-1.

1.2.3 The radiation energy range for photons is 0.1 to 50 MeV, and for electrons 3 to 50 MeV.

1.2.4 The irradiation temperature is -78 to +50°C.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Calibration-nuclear analysis instrumentation; Destructive testing-irradiation; Dosimetry; Electron radiation; Energy deposition-ionizing radiation; Ionizing radiation; Irradiance/irradiation; Photometry; Poly(methyl methacrylate) plastics-film dosimetry system; Radiation exposure-nuclear materials/applications; Spectrophotometry; poly(methyl methacrylate) film dosimetry system
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta