Saltar navegación principal
ASTM D4683-96

ASTM D4683-96

Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator

2017-08-16 /Historical
Superseeded by:

1.1 This test method covers the laboratory determination of the viscosity of engine oils at 150°C and 1 X 10 s -1 shear rate using a tapered bearing simulator-viscometer (TBS Viscometer) equipped with a refined thermoregulator system. Older TBS units not so equipped must use Test Method D4683-87.

1.2 The Newtonian calibration oils used to establish this test method cover the range from approximately 1.5 to 5.6 cP (mPa[dot]s) at 150°C.

1.3 The non-Newtonian reference oil used to establish this test method has a viscosity of approximately 3.5 cP (mPa[dot]s) at 150°C and a shear rate of 1 X 10 s -1 .

1.4 Applicability to petroleum products other than engine oils has not been determined in preparing this test method.

1.5 This test method uses the centipoise (cP) as the unit of viscosity. For information on the equivalent SI unit, the millipascal second (mPa[dot]s) is shown in parentheses.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Automotive engine oils; Calibration;empetroleum analysis instrumentation; Fuel oils; Loading tests;empetroleum products; Lubricating oils; Newtonian fluids; Non-Newtonian fluids; Rotor position value; Shear testing;empetroleum products; Tapered bearing simulator; Temperature tests;empetroleum products; Torque; Viscometers;emtapered bearing simulator-viscometer (TBS); viscosity of engine oils at high temperature/shear rate, by tapered; bearing simulator-viscometer, test,;<sfig id=00000000>Order Form</sfig>
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta