Saltar navegación principal
Normas ASTM – AENOR
ASTM D4310-98

ASTM D4310-98

Standard Test Method for Determination of the Sludging and Corrosion Tendencies of Inhibited Mineral Oils

Fecha:
2017-08-16 /Historical
Superseeded by:
Scope:

1.1 This test method covers the tendency of inhibited mineral oil based steam turbine lubricants and mineral oil based anti-wear hydraulic oils to corrode copper catalyst metal and to form sludge during oxidation in the presence of oxygen, water, and copper and iron metals at an elevated temperature. The test method is also used for testing circulating oils having a specific gravity less than that of water and containing rust and oxidation inhibitors.

Note 1-During round robin testing copper and iron in the oil, water and sludge phases were measured. However, the values for the total iron were found to be so low (that is, below 0.8 mg), that statistical analysis was inappropriate. The results of the cooperative test program are available.

1.2 This test method is a modification of Test Method D943 where the oxidation stability of the same kinds of oils is determined by following the acid number of oil. The number of test hours required for the oil to reach an acid number of 2.0 mg KOH/g is the oxidation lifetime .

1.3 The values stated in acceptable metric units are to be regarded as the standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see 7.3, 7.4, 7.5, 7.6, 7.7, 7.10, and X1.15.

Keywords:
ntiwear hydraulic oils; sludging/corrosion tendencies-inhibited mineral oils, test, ; Circulating oils; sludging/corrosion tendencies-inhibited mineral oils,test, ; Copper-corrosion; sludging/corrosion tendencies-inhibited mineral oils, test, ; Corrosion-petroleum products; sludging/corrosion tendencies-inhibitedmineral oils, test, ; Hydraulic fluids/oils; sludging/corrosion tendencies-inhibited mineral oils, test, ; Inhibited mineral oils; sludging/corrosion tendencies-inhibited mineraloils, test, ; Insoluble matter content; sludging/corrosion tendencies-inhibited mineral oils, test, ; Iron; sludging/corrosion tendencies-inhibited mineral oils, test, ; Metal catalysts; sludging/corrosion tendencies-inhibited mineral oils, test, ; Mineral oils; sludging/corrosion tendencies-inhibited mineral oils, test, ; Oxidation testing-petroleum; sludging/corrosion tendencies-inhibited mineral oils, test, ; Oxygen; sludging/corrosion tendencies-inhibited mineral oils, test, ; Sludging tendencies; sludging/corrosion tendencies-inhibited mineral oils, test, ; Steam turbine lubricants; sludging/corrosion tendencies-inhibited mineral oils, test, ; Temperature tests-petroleum products; sludging/corrosion tendencies-inhibited mineral oils, test, ; Turbine oils; sludging/corrosion tendencies-inhibited mineral oils, test, ; Water; sludging/corrosion tendencies-inhibited mineral oils, test, ;<sfig id=00000000>Order Form</sfig>
49,73
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta