Saltar navegación principal
Normas ASTM – AENOR
ASTM D4052-96(2002)e1

ASTM D4052-96(2002)e1

Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter

Fecha:
2013-05-23 /Historical
Superseeded by:
Significance and Use:

Density is a fundamental physical property that can be used in conjunction with other properties to characterize both the light and heavy fractions of petroleum and petroleum products.

Determination of the density or relative density of petroleum and its products is necessary for the conversion of measured volumes to volumes at the standard temperature of 15°C.

Scope:

1.1 This test method covers the determination of the density or relative density of petroleum distillates and viscous oils that can be handled in a normal fashion as liquids at test temperatures between 15 and 35°C. Its application is restricted to liquids with vapor pressures below 600 mm Hg (80 kPa) and viscosities below about 15000 cSt (mm 2/s) at the temperature of test.

1.2 This test method should not be applied to samples so dark in color that the absence of air bubbles in the sample cell cannot be established with certainty. For the determination of density in crude oil samples use Test Method D 5002.

1.3 The accepted units of measure for density are grams per millilitre or kilograms per cubic metre.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see 7.4, 7.5, and 9.1.

Keywords:
density; digital density analyzer; petroleum distillates; petroleum products; relative density
51,15
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta