Saltar navegación principal
Normas ASTM – AENOR
ASTM B804-96

ASTM B804-96

Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

Fecha:
2017-08-16 /Historical
Superseeded by:
Scope:

1.1 This specification covers UNS N08367 and UNS N08926 welded pipe for general corrosion applications. (Although no restrictions are placed on the sizes of pipe that may be furnished under this specification, commercial practice is commonly limited to sizes not less than 8 in. nominal diameter.)

1.2 Six classes of pipe are covered as follows:

1.2.1 Class 1 pipe shall be double welded by processes employing filler metal in all passes and shall be completely radiographed.

1.2.2 Class 2 pipe shall be double welded by processes employing filler metal in all passes. No radiography is required.

1.2.3 Class 3 pipe shall be double welded by processes employing filler metal in all passes except the inside root weld may be made without the addition of filler metal. Welds are to be completely radiographed.

1.2.4 Class 4 pipe shall be double welded by processes employing filler metal in all passes except the inside root weld may be made without the addition of filler metal. No radiography is required.

1.2.5 Class 5 pipe shall be single welded by processes employing filler metal in all passes except that the pass exposed to the inside pipe surface may be made without the addition of filler metal. Welds are to be completely radiographed.

1.2.6 Class 6 pipe shall be single welded by processes employing filler metal in all passes except that the pass exposed to the inside pipe surface may be made without the addition of filler metal. No radiography is required.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 The following safety hazards caveat pertains only to the test methods portion, Section 12, of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords:
Corrosive service applications; empipe (Ni/Ni alloy); Electric-fusion-/(arc)-welded pipe; emNi/Ni alloys; Nickel-chromium-molybdenum alloy; UNS N08367 (Ni-Cr-Mo alloy, AL 6XN); UNS N08926 (Ni-Fe-Cr-Mo-Cu-N alloy, low carbon, nitrogen modified); pipe (electric-fusion-welded Cr-Ni-Mo-Fe alloy), UNS N08367, spec.,;<sfig id=00000000>Order Form</sfig>
51,52
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta