Saltar navegación principal
ASTM B438/B438M-00a

ASTM B438/B438M-00a

Standard Specification for Sintered Bronze Bearings (Oil-Impregnated)

2017-08-16 /Historical
Superseeded by:

1.1 This specification covers sintered bronze, oil-impregnated bearings made primarily from elemental copper, tin, and graphite powders. The manufacturer may, at his discretion, use prealloyed bronze powder in the blend.

1.2 This specification covers the following variables:

1.2.1 Grades--Available in three bronze base composition grades identifiable by different graphite contents.

1.2.2 Type--Grades 1 and 2 are available in four types described by specific density ranges.

1.3 Bearings ordered to this specification will normally be sized after sintering and will be impregnated with a lubricating oil unless otherwise specified by print.

1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

density; <i>K</i> strength constant; oil content; oil-impregnated bearings; porosity
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta