Saltar navegación principal
ASTM B234M-00

ASTM B234M-00

Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

2017-08-16 /Historical
Superseeded by:

1.1 This specification covers aluminum-alloy (Note 1) drawn seamless round tube in straight lengths designated as shown in the Table 2, for use in surface condensers, evaporators, and heat exchangers.

Note 1-Throughout this specification use of the term alloy in the general sense includes aluminum as well as aluminum alloy. Note 2-For drawn seamless tubes used in general applications, see Specification B210M; for extruded tubes see Specification B221M; for seamless pipe see Specification B241/B241M; and for structural pipe and tube see Specification B429. Note 3-This specification is the metric counterpart of Specification B234.

1.2 Alloy and temper designations are in accordance with ANSI H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91060 for aluminum 1060, in accordance with Practice E527.

1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

Aluminum-tube; Aluminum alloys-tube; Condenser and heat exchanger systems-aluminum alloy; UNS A91060-tube; UNS A93003-tube; UNS A95052-tube; UNS A95454-tube; UNS A96061-tube; UNS A97072-tube; drawn seamless tubes (Al/Al-alloy), for condensers/heat-exchangers,; spec., (for metric see B 234M)
Idioma Formato

Formato físico y digital

Nota: Precios sin IVA ni gastos de envío

Añadir a la cesta